



Desktop Survey


String Inverters Options







SolarEdge Optimised Inverters Options






Solar Module Options







Why Retrofit With SolarEdge & Panel Optimisation?
- Do you have a solar Inverter that may not be performing as well as it did when you first had your installation?
- Is the yield generation lower than predicted from new?
There maybe a number of reasons why this is the case, in most cases going back to 2011 when Solar systems were first deployed on Residential and Commercial properties in the UK, inverters in general had a lifespan of 5-8 years and most cases warranties of 5 Yrs. This was the norm due to the technology within the inverters.
The first reason for inverter failure is electro-mechanical wear on capacitors… This in itself can be a cause of inverter failure. Capacitors are also extremely temperature sensitive. Temperatures over the stated operating temperature, often caused by high current, can reduce the life of the components.
Over-current and over voltage can also cause damage to the components in the inverter, most often the inverter bridge. Generally damage is caused by excess heat generated by Voltage spike or current. Over-current may be avoided with the current fuse rating, but avoiding over-current can be difficult to eliminate totally. Sometimes grid voltage can spike also caused by lightning and solar flares. Ultrasonic vibrations originating deep In the cores of inductive components can ultimately cause friction, generating unwanted heat and ultimately damaging components in the inverter.
Why Retrofit With SolarEdge & Panel Optimisation?


With your FREE voltage optimisation
Voltage Optimisation is an energy saving technology that is used to regulate, clean and condition the incoming power supply in order to reduce the voltage supplied to the optimum level for the on-site electrical equipment and appliances.
Contact Us today for your free no obligation Quotation



The Benefits of solarEdge for your home
In the unlikely event that something goes wrong with one of the panels, the rest of the system that is unaffected will typically still be operational. This allows for less downtime and allows you to continue to generate solar power during a warranty claim or service check.
In the event of a fault, your installer receives an automated message to alert them to the issue. This can save them days of downtime and the frustration of having to call out a technician to troubleshoot an unknown performance issue.
is solar panels begin to degrade in output. An example of this is a blown bypass diode that would result in a 33% reduction of output. With a string system, there is no real way of knowing if this has happened, or if one of the panels is degrading too quickly compared to the other panels and the claimable warranty. This information puts the control back in the hands of the system’s owner, allowing you to monitor the performance of your investment over the life of the system.
- Desktop Survey
- Pre-Design CAD Work
- On-site Technical Survey
- Technical Designs
- ROI Calculations
- Yield Calculations
- DNO (if required)
- Planning (if required)
- Installation works
- Commissioning
- Handover



